How to Replace a Saab 9-3 Key
The Saab 9-3 is a fantastic car that has a lot of appeal for drivers. It has excellent visibility and a strong performance engine. It also has a top safety rating.
However, it is crucial to make sure that you have at the very least two working keys for your car. It is costly to replace a key if you lose it.
How to replace the ignition Key in the Saab9-3
You have to replace your car keys if it won't turn. This guide will show you how to replace the ignition key on the Saab 9-3. You'll need to replace the key, buy another reprogrammable device, and purchase a new case for your key-fob.
Modern Saab models employ a transponder instead of a traditional key to unlock the car and then start it. The rechargeable batteries contained in the key-fob inevitably expire, and they cannot hold any charge. saab 93 key fob replacement is particularly relevant if you use the same key for the lock you have.
A professional locksmith can replace the battery quite easily. If you have the right tools and patience you can do it yourself. The first step is to separate the key-fob. Insert a flathead into the slot that is in the middle of your case. It is essential to be careful, as the plastic is extremely thin and can easily be damaged.
After the case has been opened then you can prepare the new key by combining the lower part of the old key and the transponder and banana on the new key. This will ensure that the new key is mated to the CIM properly, which could make all the difference when replacing the only key for your Saab 9-3.
How do you replace the ignition Key on the Saab 900
If you don't have two keys, you will need to remove the dashboard and steering wheel in order to access the ignition. Begin by disconnecting the negative battery cable. After the battery has been removed, you can remove all trim pieces and dashboard pieces that surround the steering wheel. Once the dash has been removed, you can put a screwdriver in the opening behind the ignition switch.
The ignition barrel is equipped with a key lock, which could prevent the vehicle from starting if it doesn't have a key. If the ignition switch on your 900 isn't functioning properly, check whether the key is inside the lock or snared inside the barrel. You should also rotate your keys and keep them clean to prevent bending.
Saab cars are different from other cars in that they don't have traditional keys made of metal. The car instead recognizes the electrical signals that come from the key fob by using the use of a specific microchip.
If you only lose one working key fob your dealer will charge you an extra fee to replace your computer module (also known as the CIM). We can reprogram the EEPROM of your current computer to allow it to accept new keys without having to replace it. You'll save more than 50% on the price of the dealer! This is the SAAB KEY PROGRAM. Find out more information about it here!
How to replace the ignition Key on a Saab 9-5
The metal portion of the classic Saab keys is easy to duplicate and doesn't pose a serious threat to vehicle theft. The electronic part of the key fob has an electronic chip that detects the car when the key is put in the ignition switch.
Saab has relied on the technology of this anti-theft device for over 10 years. It's not as good as an actual lock on the door, but it does make the act of stealing your car harder. This is the reason why every Saab owner should always keep an extra key on hand.
The majority of new Saabs come with two keys, but they can be added at the dealer's expense using a handheld device, called a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is the NG 9-3 vehicles that have more modern, more advanced features that require the use of a key-fob.
If you lose all keys in the event of a loss, the dealer will replace your CIM or TWICE modules, and charge you an extra fee. However, we can reprogram the EEPROM in your existing computer and prepare it to accept new keys, without replacing the expensive modules.
How do I replace the ignition Key on the Saab XC90
It could be time to replace your SAAB key fob if you are having difficulty turning the barrel of the lock. The process is simple and you don't even need to go to a dealership. You can complete the process at home using just a few simple tools.
The first step is to prepare the new key. Before you begin, turn off the anti-theft by placing blocks under your rear wheels, and then releasing your handbrake. Insert the key into the ignition and turn the key to the "on" position. This will activate the accessories, but not start the engine. Repeat this 5 times, and then put the key on the "on" position.
Next, you'll need to find a new case for the old key fob. They are readily available at many auto parts stores and are generally quite affordable. Depending on the model, you may even get them without any electronic components.
To open up the case, put a flathead screwdriver inside the slot that is in the middle. Gently work it. After you have split the case, you'll have access to all of the internal electronics. Use a flathead screwdriver to gently pry out the electronics.